Lining for interior doors: MDF and solid wood

To make the iron door special, decorative lining on the front door is well suited. It is necessary to choose a slip based on the general exterior, both the apartment and the entrance, taking into account the main material of the door. Today we will consider the possible lining options, the fundamental difference and the methods of mounting on wooden and iron surfaces.

Front door with trim

Types and typical features of linings

Decorative door linings are presented on the market with a wide range, so when you decide to purchase you will have to decide what suits you. First you need to pay attention to the appearance, to think what looks best. Then it is necessary to decide what the linings themselves are made of, whether it is convenient to fasten to the door, and whether this door cover will spoil.

So, we are interested in such factors:

• There should be no problems in choosing the appearance. But as for the material itself, from which the door linings are made, it differs, so you have to think it over carefully,
• In terms of the appearance of the lining are: varnished, painted, prepared for painting. There are some species that are then veneered on top with veneer or even laminate - it looks truly luxurious,
• Sometimes it is necessary to change the door handles so that they fit the design of the new appearance of the door; you have to take into account the general exterior so that nothing stands out.

When you put decorative linings, it is necessary to take into account that not only the appearance of the door changes, but also the canvas itself behaves a little differently. If you surround it with wood or veneer, the accumulated moisture will eventually render the outer parts unusable. Therefore, such cladding is not suitable for the doors of a private house, where the entrance goes immediately onto the street.

But for apartments, paneling is good, there is an entrance in the entrance and there are no such negative influences. If you still need to fix the entrance canvas of a private house, then painted plastic door linings are suitable, it is more resistant to temperature extremes and solar exposure.

Types of overlays

If we are talking about overlays, then they mean:

Plywood panels are almost the same coating as if the doors were simply wooden. Plywood, although derived from wood, has a weaker resistance to external influences. For iron entrance doors in an apartment this is a very good option.

MDF linings

The lining on the doors of MDF is made entirely of fine dust, which remains after processing the boards. This dust chemically combines with various polymeric materials and becomes very resistant to moisture.

Plastic stickers also work well, and they are also sold immediately in the shape of a door. And if you didn’t find such ones as needed, you will have to order individual ones. Plastic is a very common material, to constant moisture and other effects of the racks, it tolerates constant sunlight and seasonal temperature changes.

But after many years, plastic will burn out and radically change color. In addition, plastic is very easy to scratch with keys or other sharp objects. There is also an expensive version of plastic sheathing that does not scratch and does not fade, but they stand like another door and do not suit everyone.

So you have to decide what exactly you want to see on your door, because it depends only on your own desire. Now we will consider how to independently install decorative stickers and various overlays on an iron sheet, how to do everything correctly and beautifully, and not to spoil the original coating of the sheet.

Self-assembly

The decorative overlay on the door is completely installed independently, you just need to carefully familiarize yourself with all the features and nuances of this work. Let's start by exploring installation methods on a metal door.

First you have to figure out how to remove the external panel. This is necessary in order to disassemble the locks, handles, peephole and other external elements that will interfere with the uniform fixing of the overlays on the canvas. Now the overlay must be attached to the door, and in the canvas, drill holes for fastening.

For this, an electric drill is best suited, you need to use it very carefully so as not to scratch the coating and harm yourself. The next step is to transfer the clamp to the pad. This must be done carefully so that all the slots and elements exactly match. Now it remains to attach the padlocks and the sticker itself to the door surface.

Small nuances

Covering the front door and installation require scrupulous and slow work. At the same time, beginners have difficulties, but everything needs to be done so that the technology is not broken. Of course, a good carpenter will be happy to do the work for you, but you will have to spend a lot of money on it, as the craftsmen charge a large amount for lining metal doors.

Therefore, even if you decide to do everything yourself - do it slowly and carefully, so that later you get a decent result that will delight the owner’s eye for a long time. Special video courses with which the Internet is also providing some help, the picture is more visual than text. There, the entire installation process is analyzed in detail, each little thing is described carefully, so that you can thoroughly prepare before starting the installation. In addition, we must always have a tool, for this installation we will need:

• Glue,
• Screws
• Liquid Nails,
• Screwdrivers
• Electric drill,
• Electric jigsaw.

Screw the screws only into the holes already prepared, since it is simply not possible to pierce the iron. If you already decided that the frame is fastened with self-tapping screws, then you need to screw it around the entire perimeter of the panel so that the overlay on the entrance metal door is held evenly. The hole pitch should be at least 250 mm, otherwise it will turn out so that the stiffness of the iron door panel is impaired.

Moreover, too frequent openings in the tree can cause it to burst. Therefore, in the process of fastening we pay special attention to this. You can estimate by eye how much the panel weighs and, based on this, you can already choose the number of necessary screws and holes. So with these difficulties should not arise.

And if plastic linings are mounted on the doors, then it is allowed to stick at all, and you do not have to drill any holes in the doors.

To summarize

So, we have already studied the detailed instructions on how to independently turn a boring iron entrance into a neat wooden door, you can safely say - sheathe the door and update the look yourself - you can. If you look, the process will become accessible and understandable, and difficulties will not become a serious obstacle. So if you want to make the entrance more elegant, then you will succeed. You can do without joiners, save on them is also acceptable, the main thing is not to spoil the materials during the installation.

What is an overlay for interior doors?

The overlay is a decorative element of different shapes and sizes. It can be made of the following materials:

It serves as an additional decor to give the interior door a new stylistic appearance. In construction stores, you can buy ready-made panels with a specific pattern or individual elements to create a beautiful ornament on the canvas. Any item has a specific size and is sold individually. If it is not possible to buy a finished pad of the desired shape and size, some manufacturers offer to fulfill them to order.

MDF panel

The main demand from buyers are MDF linings. They are affordable, have an attractive design. The dense texture of the material allows you to create a diverse design on the surface of the overlays. There are smooth, convex, with a thread around the perimeter or only in the center of the part.

The basis of all MDF parts is the same. The difference is only in the film applied on top. The film sets the tone, texture of the product. This is a good way to give the interior doors the appearance of an array of canvas. Oak, beech, alder, birch - choose what is closer to you.

Door linings made of MDF panels are an inexpensive method of decorating the canvas.

But you can buy MDF lining for the interior door not only with a film coating, but also painted. Details receive an even monophonic surface of a beautiful shade. Bright elements will transform a monophonic interior.

Array

Billets from the array are also in demand among people who bought in due time doors from the array. Over time, the gloss of the facade was lost, cracks and scratches appeared that did not lend themselves to conventional restoration. Buy pads from an array of the appropriate tone, shape, stick on the affected areas.

If the door already had decors, remove them carefully, replace with new ones. You can change the style, decorative design of the interior facade by selecting overlays from an array of another type. Then the surface will be updated, the design will change. There will be a feeling that a new door is installed. An array has a higher cost than MDF. You can buy parts that are partially related to wood. They will have a base made of MDF or plywood, and the top layer of veneer of a certain type of wood. External qualities will not change, and the price will be more affordable.

Having examined the decorative elements that have the ability to close the entire surface of the canvas, it is necessary to recall the overlays that perform only the function of partially finishing the interior door. This function is carried out by moldings or polyurethane foam linings.

Moldings and polyurethane foam linings, stucco molding for interior doors

Someone will be surprised and say: “What does the decoration elements for walls and ceilings have to do with it?” The answer is simple. The modern design world allows you to combine decorative elements on different surfaces in accordance with the stylistic decision of space.

Stucco moldings today are found on furniture. Why can not they decorate the interior fabric. After all, it is an integral part of the room. If you leave the door unchanged, it will seem lonely, inappropriate. Having fixed several elements from stucco molding or PUF along the perimeter of the facade, the unity of space will not be violated.

Stucco molding makes the door leaf richer.

Such decors are convenient for some properties:

• affordability,
• light weight, will not increase the load on the hinges and the box,
• white color allows you to apply any color to the surface, create stylistic objects, aging the overlay or patinating,
• speed, ease of installation - the cover is easy to fix to the surface with glue or silicone, having previously marked out the future pattern.

The demand for decorative linings is associated not only with their aesthetic side, but also with the ability to change the interior door without the involvement of specialists. Decors are available for installation to anyone who wants to bring something new to their home. You can refine the doorway, using decorative parts instead of platbands or fixing moldings made of stucco or PUF on the surface of old platbands.

What is the price made up of?

The average price for the lining for the interior door depends on the different properties of the product:

• material used for production - the most expensive will be linings from an array or exclusive models,
• the size of the part - you can buy a whole canvas according to the size of the facade, or you can do with small fragments,
• the manufacturer and quality of the raw materials used - there are responsible companies, both domestic and foreign, producing a wide range of linings, but there are also unscrupulous entrepreneurs who care about their profit and not the quality of the goods,
• standard product or custom made according to the customer’s design.

In any case, the price of the decorative lining will be much cheaper than the new interior kit.

Stores offer different lining options. Some are on store shelves and are available for on-site inspection. There are models that can be ordered from the photo in the manufacturer's catalog. But this does not mean that the product is of poor quality. It is impossible to predict what one or another person will like. Having not found the necessary lining on the window, inquire about the availability of a catalog with a photo of the lining on the interior doors. No need to take the first one.

The overlay, like clothes, should sit on the door leaf so that there is a sense of integrity of the interior structure. As if she had just been bought, and not made in a handicraft way. The general impression of others about the style of your home, comfort and prosperity depends on this. More MDF linings can be seen in the video:

If your interior door needs treatment, become a house doctor for her. Buy linings for the interior door, complement with other decorative techniques or elements, and your home will shine with a new life.

Purpose of door linings

Over time, any door, even the most reliable and expensive, loses its functional qualities, becomes outdated in style, acquires mechanical damage (chips, scuffs, scratches) and loses its aesthetics. The restoration of a strong and durable door leaf with a decorative overlay solves several problems at the same time:

• The lost attractiveness is restored.
• Heat and sound insulation improves.
• Design changes.

Most often, the input structures exposed to precipitation and temperature changes need updating. Decorative overlays on wooden doors or from other materials of various shapes and sizes transform the entrance to an apartment or house beyond recognition.

Varieties of decorative panels for doors

Today, manufacturers offer a wide selection of panels of standard series and the production of exclusive copies to order. All decorative door linings are divided into 4 types:

• Painted. Modern paints and varnishes can tolerate temperature extremes, exposure to ultraviolet radiation, sunlight, and mechanical damage. Due to their qualities, varnished or painted panels are used for interior doors and for decorating entrance structures.
• Laminated. Strong, economical and durable coating, which is made from different materials. For decorative linings on the front door, PVC films and two-liner laminate are used, which improve sound insulation and are easily washable. Indoors, panels are sometimes installed, covered with a multilayer melamine film. Lamination provides a wide selection of colors and textures. Special anti-vandal films possess enhanced protective properties.
• Veneered. Beautiful, soft natural coating for decorative linings on interior doors, is afraid of moisture and sunlight.
• Covered with eco-veneer. The eco-veneer made of wood shavings and polyurethane foam is similar to a wooden surface with its texture, but is highly durable, does not deform, does not fade, does not crack, and is resistant to shock, friction and scratches. It is eco-friendly as it does not contain chlorides. The perfect finish for decorative trim on metal or wooden doors.

Materials for the manufacture of door linings

In the production of decorative panels for doors, wood, MDF boards (fine fraction), plywood, plastic or artificial stone are most often used.

• Nice to touch wood attracts by its smoothness, environmental friendliness, respectable appearance, durability and long service life. Usually exclusive hand-made linings are made of wood according to an individual design. Smooth or carved commercially produced panels have a laminated, painted, varnished or eco-veneered surface.
• Lining plywood used for decorating doors indoors. Even the use of moisture-resistant resins and varnishes does not save the plywood pad from delamination when exposed to moisture. The attractiveness and aesthetics of an inexpensive panel is given by lamination, veneering, or a varnished milled pattern.
• One of the most sought after and popular modern materials MDF It is highly resistant to fire and moisture. Performance is improved by surface lamination. But mechanical damage to the film leads to the destruction of MDF boards, so this material is recommended for indoor use.
• Overlays from plastic Available in a wide variety of shapes, sizes and stylistic solutions, as well as individual orders. High-quality plastic panel reliably protects the entrance structure from environmental influences.
• Recently, there has been a growing demand for decorative door trim. artificial stone. Lightweight tiles that mimic the surface of slate, onyx, brick, granite or marble do not burden the structure and do not require reinforcing door hinges. The reliable and strong stone panel keeps an esthetic look for a long time.

Comparison of door cover quality

Reaction to temperature changes

Panel Mounting

You can install a decorative trim on the door yourself or by inviting a specialist. For convenience, the door leaf is removed and placed horizontally. With a vertical arrangement of the structure, the pad is fixed with clamps. Installation sequence:

• All door accessories are removed: handles, peephole, bolts, oarlocks.
• The door leaf is cleaned, degreased (if the surface is metal) and glued with a film or painted in the color of the selected decorative panel.
• According to preliminary marking, the pad is fixed with screws. In bilateral restoration, the inner panel is fixed first.
• When mounting a decorative lining on the door, holes are drilled under the hardware. All mechanisms return to their places.

The design of the door slopes

Upon restoration of the front door, the color scheme or design changes, which leads to the replacement of door slopes. The use of a similar facing material for these purposes preserves the unity of style. The updated slopes, in addition to aesthetics, will eliminate the shortcomings of the old door or hide the cables when installing new equipment: a bell, a video surveillance system, an intercom system and more.

When installing the slopes of the front door, one should not forget about the thermal conductivity, sound insulation and durability of the finish.

Door trim for door handle

Accessories hiding a secret mechanism or setscrews ensure aesthetic completeness of the design. A wide range of decorative linings for door handles or interior doors meets the needs of every consumer. A variety of attractive and ergonomic forms of overlays corresponds to all types of door handles and mechanisms.

All shades are added to the base colors of the series for bronze, gold, copper and chrome, which allows you to choose furniture in the style corresponding to the door.

Practicality and profitability

According to customer reviews, decorative lining is a quick and economical solution for changing the design or repair of a door leaf. The growing demand for decorative door panels is due to the ease of installation and affordable cost. To install the lining using self-tapping screws and glue does not require much time and special equipment. High-quality panels allow you to forget about scratches, swelling and fading in the sun, while maintaining an attractive appearance of the door for a long time.

What size are these door linings?

MDF is quite easy to process. It is cut easily, without any significant effort. Therefore, it is possible to make even a complex, curved cut on the product - this does not seem to be an insoluble task. Due to the plasticity of the material, door panels can be made of any shape. MDF pads are usually made to order according to the size of the doorway. Their manufacture is possible not only for standard, but also for having non-standard dimensional parameters.

Features of linings made of MDF

MDF panels can be installed on any door. Strength, durability and a rich color palette of the material allow you to use them in a variety of conditions. Such linings can be placed both on a door leaf facing directly to the street, for example, in a country house, or for an interior doorway. A wide variety of surface textures provide an excellent opportunity to install them indoors, optimally choosing the colors and texture of the material most appropriate to the interior of the apartment, without violating the already established harmony.

MDF linings will decorate doors in any interior

But the most beautiful and aesthetically pleasing MDF linings still look exactly at the front doors. This material lends itself perfectly to additional surface treatment. Therefore, for even better protection and enhancement of qualities from above, it is possible to apply such coatings on it as:

• PVC film (polyvinyl chloride),
• veneer,
• special paint.

MDF protection with the help of PVC film allows achieving even higher indicators of wear resistance and product resistance to adverse effects. In addition, it becomes possible to simulate the texture of natural wood. Surface veneering for particularly valuable wood species can give even greater results. And with the help of MDF coloring with a special composition, it is possible to obtain the most unexpected visual effects.

MDF linings can be any, even non-standard sizes

Is it possible to independently install door linings?

If you have the necessary fixtures and tools, as well as at least a little knowledge and skills regarding installation work, you can try to install door linings on your own.

Tip. Do not take risks and take up the installation of linings, if the appropriate tools and minimum skills for such work are completely absent.

You need to act in a certain sequence, having previously released the door leaf from locks and accessories.

1. Apply glue for security on the panel intended for the inside, put it on the door leaf and fix it with special clips.
2. Drill the required number of holes on the outside of the door, screw the screws through them directly into the inner cover.
3. Remove the clamps from the inner panel and transfer them to the outer trim already attached to the door leaf.
4. The outer panel is installed in the same way as the inner one, except for the fastening points with screws that need to be screwed around the perimeter of the door leaf into the protruding part of the metal.

Attention! The length of the screws must be selected so that they do not protrude from the front of the panels.

Decorative MDF trim is a real decoration for the door structure. Choosing the most preferred option for texture and color, you can create a harmonious combination in the house with an already existing interior, in accordance with the general style of the room. If you have the necessary experience, it is possible to independently install such panels, otherwise it makes sense to contact a specialist.

How to decorate the front door?

There are a large number of decorating methods that differ in the type of material used, the degree of difficulty in implementing the idea. The most common:

1. Staining. This method is preferably used to decorate the entrance metal door. The paint prevents moisture, improves the appearance of the sash. Such material performs the decor of the door from the outside and inside. However, the coating gradually loses its properties, which means that it should be periodically restored. This recommendation applies to cases where the sash is located on the border with the street. In apartment buildings, the paint on the door leaf will last longer.
2. Sheathing with soft materials such as dermatin, leather. The choice is made taking into account financial opportunities, since the implementation of the second option will cost more. It is permissible to finish the entrance door inside and out. To improve the appearance, foam rubber is placed under the upholstery.
3. Laminate. Apply plates of different dimensions. Installation is carried out by placing the door in a horizontal plane. An adhesive or nails are used for fastening. The first option is suitable for metal doors, the second - for wooden casements. If glue will be used, after mounting the laminate boards on top, any relatively heavy load is placed on the horizontally oriented door leaf.

Any of the methods can be used to decorate an old door. However, pre-flap must be cleaned.

Mirror Decor

The advantages of this method:

1. expansion of space
2. the ability to distract guests from defects on the door,
3. if desired, a large-sized mirror is installed, which will allow not only to distract from scratches or chips on the surface of the door leaf, but also to close them, and the interior will also be transformed.

Door decoration can be done quickly and without the need for helpers using acrylic panels with amalgam. They are characterized by excellent reflectivity, can be installed on doors made of any materials. The advantages of this solution:

• a wide range of options that are different in color base,
• acrylic panels are not deformed,
• small mass of the product with a mirror surface,
• attractive appearance.

The main disadvantage is the high price of the material. Thanks to its light weight, decorating the door with acrylic panels is easy to do on your own. During the operation of the sash, maintenance is not required, since the mirror element does not burden the structure.

What it is?

Door linings are a panel made of natural or artificial material. It is installed on one or both sides of the door, covering its entire surface. It is often made in the form of canvas, can be equipped with various details and bizarre shapes. The product may look like a combination of several textures that complement each other perfectly.

Materials

There is a huge range of materials for making door linings. Their signs vary, so you should choose based on your personal priorities and capabilities.

Wooden linings are good in that they make the door almost indistinguishable from models created from solid material. The material is decorated with varnish, veneer, paint or laminate. Each decor method has its own characteristics.

The varnish creates an additional layer of protection against damage, it is easy to update it over time. But such a coating can be toxic, so it is not always recommended to use it in children's rooms.

Similar properties have a painted coating. The advantage of this option is the inexpensive restoration in case of loss of the pristine appearance of the door.

For apartments and rooms with a low level of humidity, veneer linings are suitable. They are quite durable if not in contact with water. In private homes, where the microclimate is wetter during certain seasons, such panels should not be installed on the door.

Laminated linings are less whimsical to moisture, but restoration of such products can be expensive, therefore they often prefer varnish coating.

Plywood is a very popular material for door linings in apartments. At first glance, it looks like a tree. Plywood has poor moisture resistance, because it contains veneer and other materials located in layers. Upon contact with water, the door may simply begin to delaminate over time. But the undoubted advantage of the material is the ability to create carvings of any complexity from plywood, which will decorate the interior of your rooms.

The basis of the popular MDF material is crushed wood dust, combined with the help of polymers. For moisture resistance, the material is covered with a protective layer of the laminate. The protective layer contributes to the unpretentiousness of the pads to a humid climate, mechanical and thermal stresses. But with constant interaction with water, the service life of the linings will still decrease, so it is recommended to use them for interior doors.

The most resistant to the effects of temperature and weather are plastic linings. The only drawback of such products will be their exposure to sunlight. In intense light, the surface may lose its original brightness.

An additional accessory to the door will be a chrome plate on a turn-key basis. It is made not only in the form of carved products from chrome, but also brass and bronze models with polishing are also found.

For registration of overlays for interior doors, PVC film is often used. It imitates the texture of natural materials. Similar products have many advantages:

• They are not exposed to moisture,
• Resistance to mechanical damage,
• The material is non-toxic

• Pads do not apply to sunlight and do not lose brightness,
• There is a huge variety of color schemes for such a material,
• Custom lining decor is possible - creating drawings and exclusive design.

Overlays decorate not only interior doors, but also car doors. They are excellent means of protecting the car and even reduce the weight of the doors. This property has carbon pads. The stores provide a huge number of varieties of door linings, among which you will certainly find a suitable design.

How to set the pad yourself

First of all, it should be noted that the lining on the front doors are of two types: internal and external. Typically, these products differ in size and installation method. The differences in the installation of the two types of linings will become clear in the process of performing the work, but for this it is necessary to understand the general technology of door decoration using these products.

First of all, it is necessary to dismantle the accessories and the lock from the door leaf.Then, an adhesive composition is applied to the inner lining, which serves as an additional fastener and will add reliability to the structure. The use of glue is a kind of insurance. After that, it is necessary to attach the pad to the door leaf, set it evenly and fix it with four clamps. Soft cloths should be placed under the mounts to protect the pad. Now you need to drill holes outside the door leaf, which are vertically unlikely. In total, four rows of five holes in each should be obtained.

Then, it is required to screw the inner cover through the prepared holes with the help of wood screws. In this case, it is important to accurately calculate the length of the fasteners, because otherwise they can penetrate and spoil the lining on the front side. Now you need to remove the clamps and transfer them to the outer part of the door leaf in accordance with the holes and slots.

The installation of the outer lining on the front door is almost identical to the installation of the inner. The difference lies in the location of the mounting screws. They must be screwed into the door leaf strictly along the perimeter of the lining in those places where the steel sheet extends beyond the frame of the leaf. Screws should be screwed in increments of 20-25 cm. The specific screwing interval is selected depending on the weight of the pad. To close the self-tapping head caps after the fastening is completed, sealing gaskets are used that prevent air from entering between the door leaf and the frame.

In conclusion, it can be noted that the installation of linings on the front door for a private house is not difficult. In the process of doing the work, it is entirely possible to get by on your own without involving a specialist in the installation. It is enough to prepare the required tools and materials in advance, to understand the principle and sequence of installation of door linings.

Dimensions

The sizes of the linings vary depending on the parameters of your doors. You can order a product of a certain size that suits you. The standard size of the plates is considered to be 2 m by 90 cm. Turnkey overlays belong to miniature overlays. As a rule, they are round in shape, their diameter reaches an average of 10 cm, depending on the size of the interior door.

Useful Tips

When choosing linings for different rooms, you need to consider their compatibility with the interior. In this case, the guests will have a good impression of the taste of the hosts. Features of interior doors decor in different rooms:

1. For the living room, an overlay made of wood or imitating a valuable breed is suitable. It is recommended to finish not only the canvas, but also the sections of the wall above and on the sides of the door. The plates decorated with carvings or stylish designs look beautiful. Preferred colors are beige, brown, golden.
2. In the bedroom, it is appropriate to apply linings made of frosted glass, wood, having a mirror surface. An interesting option is a product with a pattern combining vertical and horizontal elements. Shades should match the interior, it is better to give preference to a warm palette.
3. The door leading to the nursery should be decorated with products made of plastic or PVC film. Suitable colors - bright, original, but not too colorful. It is important that the child himself likes the picture and does not create a strain on his eyesight and nervous system.

Choosing a decorative plate, it is recommended to focus on the style of the interior. So, the loft looks relevant in combination with deliberately rough products resembling planed boards. High-tech style is perfectly complemented by matte plastic covers. In minimalism, monolithic plates with a smooth surface can be used. Baroque requires sophistication and luxury, so in such an interior it is appropriate to use expressive door handles and lining with delicate carvings.

Some more important points:

1. When buying a plate, you need to consider what material the door is made of. Products can be with a self-adhesive base, while the type of glue varies for wood and metal surfaces. To fix using self-tapping screws on a metal door, additional elements will need to be mounted. The price of the product is determined not only by the material, but also by the design. There are many ways to look after plastic and wood and plates.
2. Plastic and film decor is sometimes enough to wipe with a damp cloth to remove dust. The wood will have to be regularly treated with special means that protect against insects and fungus. In addition to decorative plates, for the decoration of the front door requires racks and panels for the threshold. It is desirable that all these elements are combined in color.

Having completed all the recommendations, the homeowner can be sure that the result of the door decoration work will live up to expectations.

Number of blocks: 7 | Total number of characters: 18654
Number of donors used: 4
Information for each donor: